Buck Boost Converter Display, DROK Auto Buck-Boost Board DC 5.5-30V 12v to DC 0.5-30V 5v 24v Adjustable Constant Current Voltage Step UP Down Voltage Regulator 4A 50W Power Supply Module
Buck Boost Converter Display, DROK Auto Buck-Boost Board DC 5.5-30V 12v to DC 0.5-30V 5v 24v Adjustable Constant Current Voltage Step UP Down Voltage Regulator 4A 50W Power Supply Module by DROK at Chip Multi. MPN: 2001711006. Hurry! Limited time offer. Offer valid only while supplies last. Parameters: Input voltage range: DC 5.5-30V (when the input voltage is 5V, the boost and buck can be achieved, but the voltage and current
Input voltage range: DC 5.5-30V (when the input voltage is 5V, the boost and buck can be achieved, but the voltage and current measurement is inaccurate; under 4.7V, under voltage protection will be activated)
Output voltage range: DC 0.5-30V
Output current: can stably work at 3A for a long time, when enhance heat dissipation can reach 4A
Output power: 35W (natural cooling), when enhance heat dissipation can reach 50W
Voltage display resolution: 0.05V
Current display resolution: 0.005A
Conversion rate: about 88%
Soft start: Yes, (a large power load module may fail when it is started)
Input reverse connection protection: yes
Output stop the current from feeding back protection: yes
Short circuit protection: yes
Working frequency: 180KHZ
Size: 66 * 48 * 21mm
Mounting hole: 4mm in diameter
1x Buck Boost Converter Module
Features & Highlights
- DROK buck-boost converter input voltage range is DC 5.5-30V; output voltage range is DC 0.5-30V, can be arbitrary adjustable; output current range is 0-3A, can be arbitrary adjustable, if enhance heat dissipation, it can reach 4A; max output power is 35W, if enhance dissipation, it can reach 50W.
- LCD Display: the voltage regulator module is designed with LCD, can display input and output voltage, output current and output power; voltage display resolution is 0.05V, current display resolution is 0.005A.
- Safe Protection: the volt transformer board is with reverse connection protection at input terminal, reverse connection will not burn; stop the current from feeding back protection at output terminal; short circuit protection.
- Application: the switching power supply can be used as an ordinary buck-boost module with over-current protection; used as a battery charger; used as a high-power LED constant current driver module.
- Button Control: button control output voltage ON / OFF status, and you can set the default output state is ON or OFF of the next time power-on.
|Package Weight:||0.13 pounds|
|Package Size:||3.11 x 1.46 x 1.46 inches|